/diy/ - Do It Yourself

Get a

Professional
Exacting
New(off course not used)
Imule
Standard

a lathe

>>1692779
Isn't a threading machine a lathe?

>>1692773
why do you need a threading machine? You a plumber?

Me, I've only ever used a power threader when needing to do anything over 1 1/2" 40 black, everything else I just use a manual ratchet threader.
I re-piped a home steam boiler system this way.

with a manual set up, you can do it on the back hitch of a truck

>>1692773
Unless you're running a small business type electrical/plumbing shop, you should be able to get by fine with a manual ratcheting hand threader...

depends anon on how many joints and what size diameters you'll be making, for few to 2" npt id suggest a mule and vise stand.. its portable if needed and easily stores away when off use.. for production quantities you'll need the setup in pic

>>1692780
No. A threading machine is specialized for threading pipe ends. It's not as precise or versatile as a lathe, but it can cut threads in one pass.

>>1692807

This.

I usually pull out the hand threader unless I'm running conduit for hours, and only then will I pull out a power pony.

>>1692773
Isn't picture like 10k? I've used it, and it's predecessor.


What's the point?

My grandfather’s passed-down ridgid 300 is the better part of 40 years old and all I’ve had to do is grease it up occasionally and replace the threading teeth. I use this fucking thing every day (sprinklerfitting). You should be able to get one off of Craigslist for $600 bucks or so from some widow selling her husband’s tools.

The stationary ridgids are nice if you have to fab a fuckton of pipe but not worth it unless that’s all you do. The only real selling point is the automatic oiler. (Also people sometimes sell them for a lot less than they’re worth because people think they’re obsolete)