[ 3 / biz / cgl / ck / diy / fa / ic / jp / lit / sci / vr / vt ] [ index / top / reports ] [ become a patron ] [ status ]
2023-11: Warosu is now out of extended maintenance.

/diy/ - Do It Yourself

Search:


View post   

>> No.2708312 [View]
File: 187 KB, 720x1426, Screenshot_20231108-163113.png [View same] [iqdb] [saucenao] [google]
2708312

>>2708058
If you're okay with it being permanent, you can go to any large hardware store and grab one of these
Just use screws with a good head (t25 or something) so you can remove them

>>2708276
It depends on the diameter of the container
I would get something over 300cfm that you can put on a variable switch

>>2708148
You're going to have to tear all the wall/ceiling covering off and remove all the mold

If water sat around stubs long term, you might need to replace those studs
I'd assume you'll need to replace floor sheathing and inspect everything single floor joist connection for deterioration

>>2708085
Dark colored
Epoxy ambers
If you do light color, put on 3 coats of spar on top to block uv


>>2708053
Depends on the solution and ions . Might have to electrify/ plate something

>>2707851
Mirror glass is stupid cheap from a glass supplier Just replace it

>>2707815
If you can get up against the roof that shed water around the chimney, see if it's water damaged.
I would get a quart of fiber reinforced elastomeric, chip brush and a chimney cap

>>2707694
The contactors are shit
Replace the $2 outlet
Even Walmart sells outlets

>>2707457
Add a closet rod to my closet

Navigation
View posts[+24][+48][+96]