/diy/ - Do It Yourself

Anonymous Sun Jan 7 18:45:25 2024 No.2739425 [View]
File: 305 KB, 330x387, papilio.png [View same] [iqdb] [saucenao] [google]

>>2739418
>>Should i upgrade to this one
upgrade?
UPGRADE????
Are you nuts?
That is not an upgrade that is a pathetic downgrade.
Do this properly and 3d print this:
https://github.com/kevinakasam/Papilio-Belt-Extruder

Anonymous Fri Dec 29 15:08:30 2023 No.2734746 [View]
File: 305 KB, 330x387, papilio.png [View same] [iqdb] [saucenao] [google]

>>2734721
Yes you would, you'd have to calibrate the extruder steps and maybe the extrusion direction. If you're getting a new motor you may need to re-terminate the ends.

>>2734706
That is an abomination, if you're going to upgrade your extruder you may as well go to a direct drive setup. If you want cheap but good, go for a papilio belt extruder and 3d print the parts yourself. At least then you will have a high quality direct drive extruder for only £30
https://github.com/kevinakasam/Papilio-Belt-Extruder

Advanced search
Text to find
Subject [?]Search by post subject. Leave empty for any.
Username [?]Search for user name. Leave empty for any user name.
Tripcode [?]Search for tripcode. Leave empty for any.
Email [?]Search by email. Leave empty for any.
Filename [?]Search by image filename. Leave empty for any.
From Date [?]Enter what date to start searching from. Format is YYYY-MM-DD
To Date [?]Enter what date to start searching until. Format is YYYY-MM-DD
Image hash
Search in	All Posts OPs Only
Deleted posts	Show all posts Show only deleted posts Only show non-deleted posts
Internal posts	Show all posts Show only internal posts Show only archived posts
Order	New posts first Old posts first
Capcode	All Posts Only by Users Only by Mods Only by Admins Only by Developers
Results	Posts Threads
Action	[ Simple ]

Navigation
View posts	[+24]	[+48]	[+96]

/diy/ - Do It Yourself

Search: