[ 3 / biz / cgl / ck / diy / fa / ic / jp / lit / sci / vr / vt ] [ index / top / reports ] [ become a patron ] [ status ]
2023-11: Warosu is now out of extended maintenance.

/diy/ - Do It Yourself

Search:

View post   
>> No.2737370 [View]
File: 1.77 MB, 4608x2182, hotend.jpg [View same] [iqdb] [saucenao] [google]
2737370

>>2737346
1) attached a photo of the hotend.
2) no, I started printing without doing this. it clogs right at the shallow "neck" of the heatbreak, between the hot and cold side, so retraction is probably the issue. thanks for pointing this out.
3) it now clogs as soon as filament is loaded. I tried cleaning the heatbreak, but probably didn't do a good enough job.

Navigation
View posts[+24][+48][+96]